100m Edge Flag Kit
100m Edge Flag Kit
The Edge Flag Kit includes everything you need to set up high-visibility edge protection quickly and safely. Each kit comes complete with Edge Flag brackets, poles, flag tape, and all required components - ready to use straight out of the box. Designed for fast installation and removal, it’s the simple, compliant way to mark roof edges, openings, and hazardous zones on any worksite.
This 100m Edge Flag Kit Includes:
- 20 brackets
- 20 poles
- 100m flag line
FREE SHIPPING NZ WIDE -LIMITED TIME
Couldn't load pickup availability
Frequently asked questions
Is the Edge flag system WorkSafe compliant?
This edge flag system also known as a ‘Bump Rail’ is within Worksafe guidelines ‘Best practice guidelines for working at height in New Zealand
Can you use Edge Flag as your sole form of fall hazard control? Or only in specific situations?
Only in low-risk situations where workers stay 2m from the edge and the roof is under 10°. Not a substitute for edge protection on high-risk sites.
How is the bracket fixed to the roof - does it penetrate the membrane or iron?
Loosen the existing roof screws and slide the Edge Flag Brackets into place before retightening.
Can Edge Flag be installed on any roofing profile (e.g.trapezoidal, corrugated, membrane)?
Yes - suitable for most metal profiles (corrugated, trapezoidal). Not recommended for membrane roofs without special fixings.
How long does it take to install 100m of Edge Flag with two people?
Two people can install 100m in 30–45 minutes.
Do you need any special tools for installation?
No - just a impact driver
Can it be installed by apprentices, or does it require a certified installer?
Yes - installation is simple and safe under supervision.
What is the maximum spacing before the flag line begins to sag?
5m max spacing. 3m is ideal for tight flag tension.
How does it perform in high wind conditions?
Performs well in strong winds. Flexible poles absorb gusts. Check tension regularly.
Is it safe to leave the system installed for multiple weeks or months?
Yes - made to remain in place for weeks during ongoing roof work.
How far back from the roof edge must Edge Flag be installed to remain compliant?
2 metres back from the roof edge, per WorkSafe guidelines.
Does Edge Flag replace the need for a fall arrest system or harness?
No - Edge Flag does not replace a fall arrest system or harness. It’s a visual warning system only, used to mark safe zones on low-risk roofs. Fall arrest gear is still required if workers are within 2 metres of the edge or working at height in high-risk situations.